Konica Minolta bizhub 40p Скачать руководство пользователя

Страница: 309 / 431

SAFETY A

D IMPORTA

T WAR

G ITEMS

S-10

• Make sure that all screws, components, wiring, connec-

tors, etc. that were removed for safety check and mainte-

nance have been reinstalled in the original location. (Pay

special attention to forgotten connectors, pinched cables,

forgotten screws, etc.)

A risk of product trouble, electric shock, and fire exists.

Safety Checkpoints

WARNING

Handling of Consumables

WARNING

• Toner and developer are not harmful substances, but care

must be taken not to breathe excessive amounts or let the

substances come into contact with eyes, etc. It may be

stimulative.

If the substances get in the eye, rinse with plenty of water
immediately. When symptoms are noticeable, consult a
physician.

•

ever throw the used cartridge and toner into fire.

You may be burned due to dust explosion.

Handling of Service Materials

CAUTION

• Unplug the power cord from the wall outlet.

Drum cleaner (isopropyl alcohol) and roller cleaner (ace-
tone-based) are highly flammable and must be handled
with care. A risk of fire exists.

• Do not replace the cover or turn the product O

before

any solvent remnants on the cleaned parts have fully

evaporated.

A risk of fire exists.

Содержание bizhub 40p
















































































































































































































































































































































































































































Результаты поиска

Содержание bizhub 40p

Отзывы:

Похожие инструкции для bizhub 40p

Бренды по названию

Популярные бренды

Konica Minolta bizhub 40p, Руководство по обслуживанию

Результаты поиска

Содержание bizhub 40p

Отзывы:

Похожие инструкции для bizhub 40p

Бренды по названию

Популярные бренды