Konica Minolta bizhub 40p, Руководство по обслуживанию

Страница: 148 / 431

Field Service V er. 1.0 Dec. 2007 9. Menu
113
bizhub 40P
Adjustment / Setting
9.8.2 EMULATION
A. DEF. EMULATION
B. POSTSCRIPT
(1) WAIT TIMEOUT
(2) PS ERROR PAGE
(3) PS PROTOCOL
C. PCL
(1) CR/LF MAPPING
Function • To set the PDL (Page Description Language).
Use • To fix the PDL as necessary. It usually switches automatically.
Setting
/procedure • The default setting is AUTO.
“AUTO” POSTSCRIPT PCL
Function • Sets the amount of time to wait for a postscript file.
Use • To set the amount of time to wait for a postscript file before the print job times out.
Setting
/procedure 1. Select [WAIT TIMEOUT] and press the Menu/Select key.
2. Select desired time with the up key
U
/down key
V
and press the Menu/Select key.
• The default setting is 0 second.
“0” second to 300 seconds.
Function • Specifies whether error pages are printed at the time of a postscript error.
Use
• To specify whether error pages are printed after a postscript error occurs.
ON : Error pages are printed at the time of postscript error.
OFF : Error pages are not printed at the time of postscript error.
Setting
/procedure • The default setting is OFF.
ON “OFF”
Function • Sets the protocol to be used for postscript printing.
Use
• To use the protocol when printing by postscript printing.
AUTO : Automatic recognition
NORMAL : ASCII letter code data
BINARY : Binary data
Setting
/procedure • The default setting is AUTO.
“AUTO” NORMAL BINARY
Function • Sets the linefeed code for PCL printing.
Use • To specify the type of linefeed to be used for PCL printing.
Setting
/procedure • The default setting is “CR=CR LF=LF.”
“CR=CR LF=LF” CR=CRLF LF=LF CR=CR LF=LFCR CR=CRLF LF=LFCR