4.7
Major messages and actions
4
[Maintenance/Troubleshooting]
4-16
Error messages
Message
Description
Remedy
[Configuration of options has
been changed.]
The option configuration was
changed while the power was
turned on.
Restart this machine.
[There is an open compo-
nent.]
The cover is opened.
Close the cover.
[Paper Jam]
A paper jam has occurred.
Check a paper jam location, then re-
move the jammed paper.
[Staple Jam]
A staple jam has occurred.
Open the cover in the right-hand
side of the
Finisher
, then remove the
jammed staples.
For details, refer to page 3-15.
[Imaging Unit Installation Er-
ror]
The
Imaging Unit
is not installed
correctly.
Install the
Imaging Unit
correctly.
[Install toner cartridge.]
The
Toner Cartridge
is not in-
stalled correctly.
Correctly install the
Toner Car-
tridge
, and close all doors.
For details, refer to page 2-3.
[Maintenance Kit Yield]
The maintenance kit has expired.
Replace the maintenance kit.
For details, contact your service rep-
resentative.
[Imaging Unit will require re-
placement soon.]
The operating life of the
Imaging
Unit
has expired.
Replace the
Imaging Unit
. For de-
tails, refer to page 2-5.
If appears [Contact your service rep-
resentative.], contact your service
representative.
[Replace Toner]
Toner is depleted.
Replace the
Toner Cartridge
.
For details, refer to page 2-3.
[Incorrect Toner]
An incorrect
Toner Cartridge
has been installed.
Install a
Toner Cartridge
which is
our genuine product with the correct
color and correct marketing area.
[Incorrect imaging unit]
An incorrect
Imaging Unit
has
been installed.
Install an
Imaging Unit
which is our
genuine product with the correct
color and correct marketing area.
[Paper Size Mismatch]
Paper of the specified size is not
loaded into a tray.
Load the correct paper into the dis-
played tray.
[Paper Empty]
A print job was executed by
specifying the
Manual Feed
Tray
from the printer driver, but
no paper was loaded in the
Man-
ual Feed Tray
.
Load paper into the
Manual Feed
Tray
.
A print job was executed by
specifying Tray X from the printer
driver, but no paper was loaded
in Tray X.
Load paper into Tray X.
[Paper Size/Type Mismatch]
The size and type of the paper
loaded in the tray specified from
the printer driver are different
from those of the paper loaded in
the tray on the main unit.
Load the paper of the appropriate
size and type into the tray, then
specify the correct size and type for
the loaded paper on the
Control
Panel
.
The size and type of the paper in
the tray that are specified on the
Control Panel
do not match
those of the paper actually load-
ed in the tray.
Load the paper of the appropriate
size and type into the tray, then
specify the correct size and type for
the loaded paper on the
Control
Panel
.
[Output Tray Full]
The amount of paper output to
the
Output Tray
has reached the
maximum.
Remove the paper from the
Output
Tray
.
Содержание bizhub 4050
