Konica Minolta bizhub 360, Руководство пользователя

Страница: 296 / 692

5 Application Functions
5-80 bizhub 360
Applicat
io
n Fun
c
ti
on
s
Ch
apt
er
5
6
Touch [OK] to return to the Application Screen.
– Touch [Cancel] on the Center Erase Screen to cancel the setting
change.
7
Select additional copy conditions, as desired.
8
Press [Start] on the control panel.
The machine will start scanning the original, then printing when ready
for output.
2
Note
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
2
Note
If no other setting is desired, the copy job can be started using the set-
tings currently specified without touching [OK] to return to the Application
Screen or Basic Screen.
5.13.3 Erasing Outside Area of Original (Non-Image Area Erase)
This function detects the original size placed on the original glass and erases
outside area of the original.
To copy using Non-Image Area Erase
0
Scan the original from original glass. Be sure to keep the ADF open.
0
Original size should be larger than 1.18 × 1.18 in.
0
Available to be used together with Erase and Center Erase.
1
Position the original on the original glass.
2
Enter the desired print quantity from the control panel keypad.