Konica Minolta bizhub 360, Руководство пользователя

Страница: 261 / 692

Application Functions 5
bizhub 360 5-45
Applicat
io
n Fun
c
ti
on
s
Ch
apt
er
5
5.8.1 Setting Repeat Times Automatically
Select the Auto Detect or Set Range mode to automatically detect or manu-
ally specify the original image size, then let the machine determine the
number of repeats from specified mode and magnification ratio.
To automatically set the repeat times
0
Scan the original from original glass. The ADF cannot be used to scan the
original.
0
Auto Detect mode uses Non-Image Area Erase function to automatically
detect the original size. Keep the ADF open.
0
Set Range mode does not use Non-Image Area Erase function. Close the
ADF.
0
Use Set Range mode to repeat a part of the original, not the entire image,
by specifying the scanning area.
Select the standard size or enter the dimensions of custom size.
Available dimensions: 2 to 17 in. for side X, 2 to 11-11/16 in. for side Y
0
Select With Margin to leave the marginal area blank without printing de-
fective images. Or, select Without Margin to print the defective images
around the edges.
0
Tray 1 will be automatically selected as copy paper tray source.
Change the tray selection manually, if desired. Auto Paper Select will not
function.
0
Auto Zoom will not function. Specify the desired magnification ratio.
1
Position the original on the original glass.
– Keep the ADF open.
2
Enter the desired print quantity from the control panel keypad.
3
Load the desired copy paper into any tray.