Konica Minolta bizhub 266, Руководство пользователя

Страница: 118 / 186

7-10 bizhub 306/266
Store Address 7 7.2
% For details on the F code such as the SUB address and password, refer to page 4-3.
8
Use the + / , key to select a setting item, then press the OK key.
% The SUB address and password can be specified using up to 20 digits.
%
If [SUB, SID SETTING] is selected: Enter the SUB address and password, then press the Back key.
% When [MODEM SPEED] is selected: Use the + / , key to select [33.6Kbps], [14.4Kbps], or [9.6Kbps],
then press the Back key.
%
Repeat this procedure until all the required settings are completed.
9
Select [RETURN], then press the OK key.
This returns to the screen where a fax number can be entered.
10
Press the OK key.
This registers settings, and returns to the Store Address screen.
7.2.5 Changing or deleting a speed dial destination
1
Press the Utility key.
2
Use the + / , key to select [DIAL REGISTRATION], then press the OK key.
3
Use the + / , key to select [SPEED DIAL], then press the OK key.
4
Enter a target 3-digit speed dial number using the Keypad , then press the OK key.
5
Use the + / , key to select [EDIT] or [DELETE], then press the OK key.
%
If [EDIT] is selected, go to the next step.
% If [DELETE] is selected, the information registered in the One-Touch Dial Key is deleted, and the
display returns to the Store Address screen.
6
Change the destination name, fax number, F code (SUB address or password), or baud rate.
After all settings are completed, the display returns to the Store Address screen.
d
Reference
For details on how to change each setting, refer to Steps 6 to 8 in page 7-7.