Konica Minolta bizhub 227, Быстрое руководство

Страница: 43 / 186

bizhub 367/287/227 2-9
2.3 About this machine 2
No. Name Description
1 Main unit Scans the original in the scanner section, and prints a scanned im-
age in the printer section.
2 Original Cover OC-514 Used to fix the loaded originals.
3 Reverse Automatic Doc-
ument Feeder DF-628 Automatically feeds and scans originals by page.
4 Fax Kit FK-513 Required to use the fax function.
5 Authentication Unit
AU-102
(Biometric Type)
Performs user authentication by scanning vein patterns in the fin-
ger.
The
Working Table WT-506 and Local Interface Kit are required
to install the Authentication Unit AU-102 .
6 Authentication Unit
AU-201S
(IC Card Type)
Performs user authentication by scanning information recorded on
the IC card.
The
Working Table WT-506 and Local Interface Kit are required
to install the Authentication Unit AU-201S .
7 Working Table WT-506 Provides an area to temporarily place an original or other materials.
This is also used when the
Authentication Unit is installed.
8 Keypad KP-101 It is equipped on the side of the Control Panel . Allows you to enter
numbers by using the Hardware Keypad .
9 Keyboard Holder KH-102 Install this holder to use an external keyboard.
10 Desk DK-513 Used to place this machine on the floor.
11 Paper Feed Cabinet
PC-413 Can load up to 2500 sheets of 8-1/2
e
11 (A4) size paper.
12 Paper Feed Cabinet
PC-213 Can load up to 500 sheets respectively into the top and bottom
trays.
13 Paper Feed Cabinet
PC-113 Can load up to 500 sheets into the top tray. (The bottom tray is a
storage box.)
14 Finisher FS-534 Sorts, groups, or staples output sheets as required. To install the
Finisher FS-534 , the Relay Unit RU-514 is required. Also, Desk
DK-513 , Paper Feed Cabinet PC-413 , Paper Feed Cabinet
PC-113 , or Paper Feed Cabinet PC-213 must be installed on this
machine.
15 Saddle Stitcher SD-511 Used to add the center staple function to the Finisher FS-534 .
16 Punch Kit PK-520 Used to add the punch function to the Finisher FS-534 .
17 Relay Unit RU-514 Required to install the Finisher FS-534 .
18 Finisher FS-533 Sorts, groups, or staples output sheets as required. This unit can be
installed in this machine.
The
Mount Kit MK-602 is required to install the Finisher FS-533 .
19 Mount Kit MK-602 Required to install the Finisher FS-533 .
20 Punch Kit PK-519 Used to add the punch function to the Finisher FS-533 .
21 Job Separator JS-506 Used to separate output sheets into two trays in the body of the ma-
chine.