Konica Minolta Bizhub 222, Руководство по обслуживанию

Страница: 581 / 846

12. Troubleshooting Field Service Ver. 1.0 Dec. 2008
194
FK-503
TROUBLESHOOTING
9A Correct line cannot be
decoded within 35
seconds during ECM
image signal recep-
tion V.34 failure
{
Set V.34 to OFF and the signal
transmission level to -16dBm, and
send again.
Destination
machine failure
{
Change the destination machine
and send again.
Line failure
(packet loss,
delay, etc.)
{
Confirm the status of the network
(HUB connection, etc.)
FAX(S) board
failure
{
Replace FAX(S) board.
MFBS board fail-
ure
{
Replace MFBS board.
9C CRP is received thrice
during waiting for
answer for initial rec-
ognition signal V.34 failure
{
Set V.34 to OFF and the signal
transmission level to -16dBm, and
send again.
Destination
machine failure
{
Change the destination machine
and send again.
Line failure
(packet loss,
delay, etc.)
{
Confirm the status of the network
(HUB connection, etc.)
FAX(S) board
failure
{
Replace FAX(S) board.
MFBS board fail-
ure
{
Replace MFBS board.
9D Reception command
error (not carrier dis-
connection) V.34 failure
{
Set V.34 to OFF and the signal
transmission level to -16dBm, and
send again.
Destination
machine failure
{
Confirm the status of the destina-
tion machine.
Line failure
(packet loss,
delay, etc.)
{
Confirm the status of the network
(HUB connection, etc.)
9F Pages being received
by EOR-Q or EOR-
PRI-Q signals from
the transmission side
with ECM procedure
are destroyed (since
the procedure is con-
tinued, the next page
may be transmitted) V.34 failure
{
Set V.34 to OFF and the signal
transmission level to -16dBm, and
send again.
Destination
machine failure
{
Confirm the status of the destina-
tion machine.
Line failure
(packet loss,
delay, etc.)
{
Confirm the status of the network
(HUB connection, etc.)
Error
Code
Error Details Possible Cause Action to be Taken
Dest. Line Self