Konica Minolta Bizhub 165, Руководство пользователя

Страница: 36 / 146

Basic operations 3
3-6 bizhub 165
3.2
Configuring a custom size
1
To load a custom size in
Tray 1
, press the
Menu/Select
key ö [COPY JOB SETTING] ö [TRAY1 PA-
PER] ö [SIZE] ö [SIZE INPUT].
To load a custom size into the
Bypass Tray
, press the
Menu/Select
key ö [COPY JOB SETTING] ö
[BYPASS PAPER] ö [SIZE] ö [SIZE INPUT].
2
Specify the length [X] of the paper by pressing the
keypad
, then
press the Menu/Select key.
% To delete the paper size, press Clear/Stop key.
3
Specify the width [Y] of the paper by pressing the keypad , then
press the
Menu/Select
key.
% To delete the paper size, press
Clear/Stop
key.
Specified paper size appears on the
Display
.
3.2.2 Placing originals
0 Do not place an original weighing more than 2 kg (4-7/16 lb) on the
Original Glass
. Furthermore, do not
use a strong force to press down on a book or any other form of original that must be spread on the
Original Glass
. Otherwise, the machine may be damaged or a failure may occur.
0 For thick books or large objects, perform scanning without closing the Original Cover . When a original
is being scanned with the
Original Cover
open, do not look directly at the
Original Glass
surface where
light may be emitted through. Note, however, that the light coming through the Original Glass is not a
laser beam, and will not expose the user to the related hazards.
0 Make sure that the original and the loaded paper have the same orientation. Otherwise, some parts of
the image may be lost.
1
Lift open the
Original Cover
.
2
Place the original face down on the
Original Glass
.
% Load the original by placing it so that its top side faces the
back or the left side of the machine.
TRAY1 PAPER SIZE
X=210(140-432)
Y=297( 90-297)
BYPASS PAPER SIZE
X=210(140-432)
Y=297( 90-297)
X
Y