Konica Minolta BIZHUB 162, Руководство по обслуживанию

Страница: 81 / 89

18. Fusing unit section Theory of Operation Ver. 1.0 Apr. 2005
54
bizhub 162 bizhub 210
Composition/Operation
18.5 Fusing Temperature Control (for bizhub 162)
• The Fusing Roller Heater Lamp is turned ON and OFF to keep a set temperature on the
surface of the Fusing Roller.
• The Fusing Roller surface temperature is detected by using a thermistor that translates
the temperature to a corresponding electrical signal.
• If the Fusing Roller temperature becomes excessively high, the Fusing Roller Heater
Lamp is shut down.
Machine Condition or Paper Type Mode 1 Mode 2 Mode 3
Standby 180 °C 180 °C
→
170 °C 170 °C
Plain paper (width: 250 mm or more;
length: less than 360 mm)
190 °C 190 °C
→
170 °C 170 °C
Plain paper (width: less than 250 mm) 180°C 180 °C
→
165 °C 165 °C
Thick paper (width: 250 mm or more) 210 °C 210 °C
→
190 °C 190 °C
Thick paper (width: less than 250 mm) 200 °C 200 °C
→
190 °C 190 °C
OHP film (width: 250 mm or more) 180 °C 180 °C
→
165 °C 165 °C
OHP film (width: less than 250 mm) 155 °C 155 °C 155 °C
<Temperature Control in Standby State>
Warm-up completed
4034M541CA
bizhub_162_210_TO.book 54 ページ ２００５年４月１８日 月曜日 午後１時２７分