3. Pull out enough film to reach the Take-Up Spool (31). Insert film end into any slot (32) in the spool. The
film will be gripped instantly as you .
4. Advance the Film Transport Lever (11) one full stroke. Make sure that the sprocket holes in the film engage
the Sprocket Wheel (30) in your camera.
5 Close the camera back. Gently, turn the Film Rewind Crank (18) until resistance is felt (this takes up the slack
of the film within the
cassettes
6 Press the Shutter Release Button (1) and operate the transport lever until the Number I appears in the center
of the Film Counter (2).
4 .butkus.org
To Check Film Advance
It's easy to make sure your camera is loaded correctly. While operating the transport lever, watch the Film
Transport Indicator (17) to see if it rotates. If it does, you know that film is going through properly; if it doesn't
it's not.
