Konica Minolta AccurioPress C4070, Краткое руководство

Страница: 23 / 36

23
18.Measure the misalignment between
[+] of [1] to [4] on the [Back Side]
and [+] on the [Front Side] of the print
chart
✓
The figure shows
an example to
measure [1]. The
scale resolution is
0.5 mm
✓
The black in
the figure indicates
the front side, and
the blue
indicates the back side.
✓
Measure the X and Y directions
to check the misalignment of
print position
✓
You can enter a
value in 0.1 mm
increments
19.Touch [X] or [Y] of
each point to enter
the measurement
value
20.Touch [Adjustment
Start] to finish
21.Touch [Print Mode], and Press [Start]
to print test chart and check the
misalignment. Repeat 14-21 until the
front and back are aligned
18.量度測試圖的背頁[1]至[4]的[+]號和
前頁[+]號的差距
✓ 圖解是[+]號[1]的例
子，每條尺度代表
0.5mm
✓ 圖解中的黑線尺度代表
前面， 藍線代表背面
✓ 量度方向X和Y
✓ 可輸入以0.1mm 為 單
位的準確度
19.按[X]或[Y]輸入數 值
20.按[ 啟 動調整]執行調整
21.按[列印模式], 再按[Start]打印測試表
和 查 看調整效果. 重覆步驟14-21直至前
面和背面影像一致
Tray Setting 紙盤設定
B o th Side Adjustment ( Part5 )
兩面調整
(
第五部份
)