Kongsberg EA640, Руководство по установке

Страница: 39 / 94

413764/B
39
Note
The use of "U" shaped profiles and bulkhead support bracket(s) is optional.
2 Mount the "U" shaped profiles.
a Design, manufacture and mount the U-shaped steel profiles.
b Make sure that the profiles can withstand the full weight of the cabinet.
c Make the required mounting holes to accept the bottom frame (with shock
absorbers).
d Position the profiles on the deck, and mount them using bolts or welds.
3 Mount the bottom frame.
The bottom frame is fitted with four shock absorbers. If you have used U-shaped
profiles, place the frame on top of these.
4 Mount the bulkhead support bracket.
a Design and manufacture the bulkhead bracket.
b Make the required mounting holes to accept the top shock absorbers.
c Position the brackets on the bulkhead, and mount them using bolts or welds.
5 Mount the top shock absorber assembly.
a Remove the four lifting lugs.
b Mount the top shock absorber assembly using two of the same holes.
c Use spare bolts to close the remaining lifting lug holes.
6 Place cabinet in its correct position on the bottom frame.
a Use four bolts through the bottom frame to secure the cabinet.
b Mount the top shock absorbers to the bulkhead support bracket(s).
7 Fasten the earth strap.
Mounting the drawers in the WBT Cabinet
The WBT Cabinet can contain maximum seven custom drawers. Each drawer will hold
one WBT and its power supply. The drawer is mounted in the same way as any other
equipment designed for 19" racks using standard tools.
Prerequisites
You must be equipped with a standard set of tools. This tool set must comprise the
normal tools for electronic and electromechanical tasks. This includes different
screwdriver types, pliers, spanners, a cable stripper, a soldering iron, etc. Each tool
must be provided in various sizes. We recommend that all tools are demagnetized to
protect your equipment.
Installing the EA640 hardware units