KONE ReSolve 200
Installation Instruction
17 (258)
AM-10.65.001
(D) 2013-04-17
© 2009 KONE Corporation
All rights reserved.
Safety signs
The following safety signs are used in this instruction as highlights.
Determining need for car top balustrade
When working on car roof the need for car top balustrade must be determined.
When there is a risk of falling from height that can cause injury, car top balustrades/railings
must be fitted and raised before accessing or man riding on an elevator car top.
Possible differences between this instruction and local safety regulations must be
considered. Dimensions and rules in this instruction fulfil requirements set in EN 81-1. If local
requirements are at a higher level than described in this chapter, then they must be followed.
In case of conflict between requirements, follow the local legal requirements.
If working on old equipment where no balustrade exists then additional protective measures
must be taken as defined by risk assessment. Solutions may be based on use of temporary
portable balustrades/rails or fall restraint solutions. If fall arrest is used then special care must
be taken to define rescue measures, in case of fall.
Turn main
power OFF
Lock and tag
the switch
Verify de-
energization
Push the stop
button OFF
Fall prevention
measures