Kone ReSolve 200 Скачать руководство пользователя страница 15

KONE ReSolve 200

Installation Instruction

15 (258)

AM-10.65.001

(D) 2013-04-17

© 2009 KONE Corporation

All rights reserved.

Personal protective equipment

Safety gloves, safety footwear, safety helmets, eye protection, dust masks, hearing protection 
and fall protection equipment are supplied for your personal protection. USE THEM AS 
REQUIRED.

Special precautions to limit injury in the event of a fall

Safety item

Safety harnesses and associated equipment. Refer to 

AM-01.03.001

.

Dust mask, suitable for working with mineral wool insulation in landing doors.
First aid kit.
Eye protection.
Safety gloves.
Rubber gloves for protection when cleaning rails.
Hearing protection.
Safety helmet.
Work clothes / overalls.
Safety footwear with ankle protection.

WARNING

If the safety harness and its associated 
equipment are not used correctly you may still 
sustain severe injury or death during a fall.

Requirements

Always use the harness attached to an approved fixing point when there is a risk of falling 
and you are working 1.8 m or more above a lower level. 

Refer to AM-01.03.001.

It is recommended that you attach the harness to a fixing point at least 2.0 m above the 
working height.
Where this is not possible keep the lanyard AS SHORT AS POSSIBLE to minimize your 
free fall. (Be aware of the effect of rope and harness stretch when estimating the likely drop 
area and consider the risk from possibly dangerous striking points like guide rail brackets.)
If you are likely to fall down the side of the car you must try to minimize the free fall 
distance to 300 mm or less.
If you have attached the harness to a guide rail bracket or other fixed point in the elevator 
shaft you must ensure that there can not be any unwanted movement of the working 
platform.

When your safety harness is not secured to a life line or other approved fixing point, ensure 
that the lanyard does not cause a catching or tripping hazard.

Содержание ReSolve 200





















Отзывы: