EN - 15
timer display changes to the timer that
will run out next. The assignment of the
timer is displayed by a flashing Cooking
Zone Indicator. The number of timers that
are running is indicated by the number of
cooking zone indicators that are illuminated.
By toggling , you can display the timer
values for the heater timer and the minute
minder. The assignment is always indicated
by the flashing Cooking Zone Indicator.
If no Cooking Zone Indicator flashes, the
minute minder time is shown in the 2-digit
Timer Display.
All heater timers can be cleared by
switching the appliance into S-Mode
using .A minute minder timer will not be
cleared, it will continue to count down.
To clear a timer in Operation Mode, you
first have to select the timer by toggling the
Activate/Deactivate Timer Button until it is
displayed. The value can be cleared in 2
different ways:
Decrement by using the slider button
until ´
00
` is shown on
the Timer Display.
Once a timer reaches ´
00
`, the
corresponding heat level will be set to ´
0
`.
The end of a heater timer or the minute
minder is indicated by a buzzer This can be
stopped by pressing any button.
Key Lock
The key lock function is used to set
‘save mode’ on the appliance during
operation. It will not be possible to make
any adjustments by touching the buttons
(for example heat settings). It will only be
possible to switch the appliance off.
The lock function is active, if the Key
Lock button is pressed for at least 2
seconds. This operation is acknowledged
by a buzzer. After successful operation, the
key lock Indicator flashes and the heater is
locked.
The heater can only be locked in Operating
Mode (B-Mode).
If the heater is locked, only the button
can be used. All other buttons are blocked.
If any other button is pressed in the blocked
mode, the buzzer sounds and the Key Lock
Indicator flashes. Only the switch off by
operation by using is possible. However,
if you switch off the appliance, you can not
restart it again without unlocking.
After pressing , the Key Lock Indicator
disappears. Now, the hob control is
unlocked and can be operated in normal
manner.
Child Lock
Child lock can be used to lock the appliance
in a complicated Multi-Step process. Child
lock (and unlocking) is only available in
S-Mode.
Press until the buzzer sounds, then
simultaneously press the the right and
the left of the slider button for at least 0.5
seconds, but no longer than 1 second.
After this, the appliance can be locked
by pressing the right of the slider button.
In all heater displays ´
L
` is shown as
confirmation.
If the minute minder is still running, it will
proceed until ´
00
` is reached and the
timer sounds. Once the timer has finished
counting down, the appliance is fully locked.
None of the buttons can be used as long as
the appliance is locked.
Child lock can be deactivated in the same
way that it is activated. Press until a
beep is heard, then simultaneously press
the right and the left of the slider button for
at least 0.5 seconds, followed by pressing
only the left side of the slider button. To
confirm unlocking, the ´
L
` symbol in the
displays will be cleared immediately.
Stop & Go
Stop & Go function is used for pausing the
operation of the heaters during cooking. If
the Stop & Go button is pressed while
the heaters are in operation all heaters will
be turned off. Pressing for a second time
Содержание UKE6040KOCVSBR
Страница 35: ......
