17
16
Use of the interchangeable milling system
The little brush
should be in this
position!
Change the milling system within only 60 seconds!
A
Unplug power plug. Unscrew the funnel counter-clock-
wise and lift out the upper stone. Holding the lower
stone with one hand, unscrew the screw in the middle
of the stone counter-clockwise using the provided
4 mm
Allen key
B
Turn the lower stone to align the small brush beneath it
with the flour spout tube (see inset-photo in picture A).
Then, gripping the milling chamber insert on both left
and right sides as shown in picture B, lift it upward, with
the stone, from the housing.
C
Clean the flour spout with the provided brush to remove
any flour dust which may have entered the flour spout
and which also may enter the green milling chamber
insert (see next step) when introducing it.
D
When inserting the green milling chamber insert make
sure to push the flour spout into the housing as far as
possible. Then press down the milling chamber insert,
working from front to back until its upper lip rests fully
on the rim of the lower chamber. Align the holes in the
insert’s left and right sides with the corresponding holes
in the lower milling chamber.
E
Put the new lower stone onto the motor shaft, aligning
the slot in its center ring with the pin on the motor shaft,
as in picture E. Hold the stone and tighten the screw
and the small metal block clockwise using the Allen key.
F
Insert the new upper stone and reattach the hopper,
setting the hopper to a proper setting to begin grinding.
Your mill is now ready for use again.
After a couple of tries, this exchange is accomplished
quickly and easily.
Interchangeable milling system
For the first time, it is possible to process coffee,
spices, gluten-free or gluten-containing cereals in
only one mill – the KoMo interchangeable mill-
ing system makes it happen. The milling system
is composed of an interchangeable milling cham-
ber insert made of silicone and is delivered with
an additional pair of milling stones. Within a few
steps it can be inserted into the mill and it is
absolutely easy to clean after use.
Included items
1 milling chamber
insert, 11 pair of mil-
ling stones, 1 brush,
1 4 mm Allen key
Material milling chamber
insert
Silicone, dishwasher
safe
Weight
750 - 820 g
Material milling stones
Corundum/ceramic
Warranty
2 years
Technical specifications
Interchangeable milling system
Interchangeable milling
system 250
For the 250 watt mills Fidibus 21, Fidibus Magic, FidiFloc 21;
milling stone diameter: 2.95”
Interchangeable milling
system 360
For the 360 watt mills Fidibus Medium, Fidibus Classic, PK1, FidiFloc Medium,
Duett 100; milling stone diameter: 3.35”
Interchangeable milling
system 600
For the 600 watt mills Fidibus XL, Duett 200;
milling stone diameter 3.35”
For every KoMo mill an appropriate interchangeable milling system is available:
CEREAlS
GluTEN-FREE
CEREAlS
SPICES
COFFEE
A
B
C
D
E
F
Содержание Grain Mill
Страница 1: ...User Manual for Grain Mills and Flakers ...