Innovative technology only for a better vision world
Hunan Bowan Technology Co.,Ltd.
58
1. Ensure both servers are in lan and also Kommander T3 is opened and the
corresponding sever have set the right mode
a) Slave-end: shows that the current device works as the slave-end.
Can be connected by the master-end, and will receive and execute
commands sent by the master.
b) Master-end: shows that the current device works on the primary
side. You can set up slave management to send commands to the
connected slave.
2. Slave-end connection setting: Set the working mode of the program as
slave-end through the menu "Settings-System-Linkage connection".
a) Synchronization: When the device works on the slave-end, this
attribute can be set to determine the processing method after the
slave receives the plan switch command.
b) Synchronize by serial number: It means synchronize according to
its number of the plan. If the master sends a command to switch to
the third plan in the third group, the slave-end also executes the
switch plan code of the third plan in the third group. If there is no
such plan, it will not be ignored.
c) Synchronization by name: shows that the synchronization is
performed according to the name of the plan. If the main-end sends
a command like switch to "Plan A", the slave-end also switches to
"Plan A", if the "Project A" does not exist in the slave project.,then
the slave-end will neglect it automatically
3. Main-end setting
a) Check the plan linkage and select the controlled slave through the
slave management.
b) If you need to automatically connect to the last slave and control it
every time you turn on the device, please check the box “Auto-
connect slave-end when starting"
4. Slave management: When the computer is working as the master, there is
a "slave management" item in the settings, which is used to set which
slaves will perform the linkage operation.
a) Automatically discover the devices working on the slave-end under
the same network, which is convenient for the user to connect the
slave-end that is needed to be connected.
b) History information is recorded here. If invalid information is found,
you can switch a master-slave mode or restart the project to clear
the historical information.
c) If the information is in red, which indicates that the connection
history was discovered, but it is currently unavailable.
Содержание PS4
Страница 24: ...Innovative technology only for a better vision world Hunan Bowan Technology Co Ltd www kommander com cn en 24 ...
Страница 75: ...Innovative technology only for a better vision world Hunan Bowan Technology Co Ltd www kommander com cn en 75 ...
Страница 79: ...Innovative technology only for a better vision world Hunan Bowan Technology Co Ltd www kommander com cn en 79 ...
Страница 124: ...Innovative technology only for a better vision world Hunan Bowan Technology Co Ltd www kommander com cn en 124 ...