Komfovent ping, Руководство по установке

Страница: 3 / 10

Network module manual
- 3 -
INTRODUCTION
Network module “Ping” is intended for connection of KOMFOVENT air handling units to
the computer network (Ethernet) or another network (RS-485). If “Ping” module is not added by
factory, it can be installed on each air handling unit (AHU) additionally (except units with C2
controller). For this case user need to have installation kit:
1.
Network module („Ping“).
2. Additional connection cable (5 m.).
3. CD with software and manuals.
NETWORK MODULE CONNECTIONS
NETWORK MODULE INSTALLATION
1.
Network module can be installed provided place under given following conditions:
•
ambient temperature range 0°C ... 40°C;
•
relative humidity limits 20% … 80%;
•
protection must be ensured from accidentally vertically falling water drops (IP X2).