Komfovent ping, Руководство по установке

Страница: 10 / 10

Network module manual
- 10 -
MODBUS ADDRESS CHANGING
If air handling units are connected to serial RS485 line, for each “Ping” module is needed to
select MODBUS address for retranslation. For it using one of the above mentioned connections
(Ethernet or RS485) in “Ping Manager” program must be inserted retranslating address (11), push
the “Write” button (12) and after few seconds push „Set Static Configuration” (13):
Note: If “Ping module should retranslate only one address, write the same address in the program
„Min Address“ and „Max Address“ windows (example, 20). If to the serial connection of
“Ping” module is connected more that one unit, then is needed to write interval of
retranslating addresses (example, Min. Address 1, Max Address 20).
11
12 13