Komatsu WA250PT-5H страница 99 Скачать руководство пользователя | Manualshive

Страница: 99 / 255

background image

OPERATION

Explanation of components

Steering tilt lock lever

3-41

Parking brake lever

0.

WARNING

Always apply the parking brake when leaving the machine or when parking it.

NOTICE

Never use the parking brake lever to brake the machine when traveling except in an emergency. The
parking brake may be damaged and this may lead to a serious accident. Apply the parking brake only
after the machine has stopped.

If the parking brake has been used as an emergency brake when traveling at high speed (near the max-
imum speed), contact your Komatsu distributor to have the parking brake checked for any abnormality.

This lever (7) operates the parking brake.
Pull the lever up to the LOCK position to actuate the parking
brake. At the same time, the parking brake pilot lamp will light
up.
To release the brake, pull the lever, then press button (A) at the
tip of the lever and return the lever to the FREE position. At the
same time, the parking brake pilot lamp will go out.

REMARK
If the directional lever is placed at the FORWARD or
REVERSE position with the parking brake still applied, the
central warning lamp will light up and the buzzer will
sound.
Before operating the directional lever, check that the park-
ing brake lever is at the FREE position.
When the parking brake is applied, the machine will not
move even if the directional lever is operated.

Steering tilt lock lever

0.

WARNING

Stop the machine before adjusting the tilt of the steering wheel. If this operation (adjustment) is carried
out while the machine is moving, it may lead to a serious accident or personal injury.

This lever allows the steering column to be tilted forward or
backward.
The amount of adjustment is 8° to the front and 10° to the rear
(stepless) from the neutral position.
1. Set the lever (1) to FREE position (a).
2. Set the steering wheel (2) to the desired position, then set

lever (1) to LOCK position (b).

9EA04447A

Free

Lock

«
...
97
98
99
100
101
...
»

Содержание WA250PT-5H
































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для WA250PT-5H

Бренд: Jungheinrich Страницы: 221

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды