Komatsu WA250PT-5H, Руководство по эксплуатации и техническому обслуживанию

Страница: 88 / 255

Explanation of components
OPERATION
Switches
3-30
Switches 0.
Starting switch 0.
This switch (1) is used to start or stop the engine.
OFF position
In this position, it is possible to insert or remove the starting
switch key. All the electric system switches are off, and the
engine will stop.
ON position
In this position, electric current flows to the charging circuit,
lamp circuit, and accessory circuit.
Keep the starting switch key at the ON position while the
engine is running.
START position
This is the position to start the engine. Hold the key at this
position while cranking. Release the key immediately after the
engine has been started. The key will return to the ON position
when released.
(1) Starting switch (11) Front working lamp switch
(2) Speed range selector switch (12) Rear working lamp switch
(3) Variable shift control switch (13) Monitor panel mode selector swiitch 1
(4) Directional selector switch (14) Monitor panel mode selector swiitch 2
(5) Directional selector actuation switch (15) Front wiper switch
(6) Traction control switch (16) Rear wiper switch
(7) E.C.S.S. switch (17) Cigarette lighter
(8) Lamp switch
Turn signal lever
Dimmer switch
(18) Room lamp switch
(19) Rear heated wire glass switch
(20) Attachment selection switch
(9) Horn button (21) Dump speed switch
(10) Hazard lamp switch