Komatsu PC22MR-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 74 / 312

SAFETY MACHINE OPERATION
SAFETY
2-46
LIFTING OBJECTS WITH BUCKET LINK LIFTING DEVICE (OPTIONAL
EQUIPMENT)
2
SAFETY RULES FOR LIFTING OBJECTS 2
q
Determine the signals to be used and place a signalman in position.
q
To prevent the machine from tipping over or falling, carry out the operation on flat ground.
q
To prevent the danger of contact with a raised load or the danger from a falling load, do not allow any worker
inside the area.
q
Do not exceed the specified lifting load.
For details of the maximum lifting load permitted for this machine, see the lifting capacity decal and link
markings.
REMARK
RLL (Rated Lifting Load) for the link may not be the same as the lifting capacity of the machine.
Always be sure to lift within the relevant lifting limits.
q
The lifting link RLL (Rated Lifting Load) and part number
(A) are stamped on the link as shown below.
q
All components in the load line (eg.chains, shackles etc.)
must be rated correctly for the load to be lifted.
q
When swinging or operating the work equipment, check
carefully that the surrounding area is clear from objects,
structures or any persons working around the machine.
q
When lifting, reduce the revs of the engine and perform
slow movements of the equipment.
q
Never travel the machine while lifting a load.
q
Do not swing or operate the work equipment suddenly.
There is a danger that this may cause the load to swing
and the machine to become unstable or tip over.
q
Do not leave the operator seat when there is a raised load.
RKA33300
A
RLL
WEAM014500