Komatsu Galeo PC138US-8, Руководство по ремонту

Страница: 911 / 946

50 Disassembly and assembly SEN02715-00
PC138US, USLC-8
11
4) Remove the release tape of the both-
sided adhesive tape on the glass side.
5) Apply adhesive (15) to the outside of both-
sided adhesive tape (7) of the operator’s
cab.
a
Apply adhesive (15) to dimensions s
and t of both-sided adhesive tape (7)
of operator’s cab (8).
q
Dimension (s): 10 mm
q
Dimension (t) : 15 mm
a
Apply adhesive (15) higher than both-
sided adhesive tape (7).
a
Apply the adhesive evenly.
a
As for the right side window glass,
apply the adhesive to the outside of
the both-sided adhesive tape on the
periphery of the glass.
7. Install the window glass.
1) Install window glass (9), matching it to the
lines of the positioning tapes drawn in step
5.
a
Sine the window glass cannot be
removed and stuck again, stick it very
carefully.
a
Stick the glass within 5 minutes after
applying the adhesive.
2) After sticking window glass (9), press all
around it until it is stuck to the both-sided
adhesive tape.
a
Press the corners of the window glass
firmly.
a
You can perform this work efficiently
by pulling window glass (9) from
inside of the operator’s cab with suc-
tion cup
X1 .
(The figure shows the operator's cab
of PC200-7.)