Komatsu CX20 Series, Руководство по обслуживанию

Страница: 30 / 55

1.2. SAFE TRAVEL
1-10
BE AWARE OF THE LIFT TRUCK'S MAXIMUM HEIGHT
AND WIDTH
• Ensure that there is ample height and width for the lift truck
to pass.
• Do not extend your hands or legs outside the operator's
compartment or the area covered by the overhead guard
(safe area).
• Check that the surrounding area is safe.
• Be careful of electric wires and other obstacles inside and
outside the building.
WHEN DRIVING UP OR DOWN A SLOPE, EXERCISE
EXTRA CARE
• Do not turn, or travel across or at an angle on slopes. There
is danger that the lift truck will tip over.
• Before starting to drive up a slope, stop the lift truck and
adjust the clearance between the ground surface and the
bottom of the forks so that the bottom of the forks or pallet
do not contact the ground surface or the tip of the fork does
not stick into the ground when traveling.
• For safe travel on slopes:
• On a downslope, drive down slowly and use the foot brake.
• When starting on slopes, the lift truck may start to move
down the slope depending on the amount the pedals are
depressed.
Always leave ample room in front of and behind the lift truck
when starting on slopes.
• Be careful of the truck sliding downhill if Travel Interlock is
engaged while traveling uphill or on a slope. Stay securely in
the operator’s seat!
W h e n
loaded:
Travel forward up the slope, and in reverse
down the slope with the load upgrade.
W h e n
unloaded:
Travel in reverse up the slope and forward
down the slope with the load-engaging
means downgrade.