background image

FEDERAL EPA EMISSION CONTROL STATEMENT

15

2. WARRANTY

The following statement is hereby provided as required by regulations of the United States Environmental Protec-
tion Agency (EPA).

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The Federal EPA and Komatsu Forklift USA, Inc. (hereinafter referred to as “KFI”) are pleased to explain the emis-
sion control system warranty on your 2004 or later Diesel heavy duty off-road engine. All new, heavy-duty off-road
engines must be designed, built and equipped to meet the EPA’s stringent anti-smog standards. KFI must warrant
the emission control system on your engine for the period of time listed below, provided there has been no abuse,
damage, neglect or improper maintenance of your engine.

Your emission control system may include parts such as fuel injection pump. Also included may be hoses, belts,
connectors and other emission-related assemblies.

Where a warrantable condition exists, an authorized Komatsu dealer will repair the heavy-duty off-road engine at
no cost to the owner, including diagnosis, parts and labor.

Now, KFI hereby certifies that diesel engines for lift trucks produced in 2004 model year and after shall be regu-
lated by Federal EPA exhaust gaseous regulations. The difference between current and EPA-certified engines is
only the labels attached on the engine. See available drawing and/or illustration of emission label and its location.

Содержание CX20 Series
























































Отзывы: