Komatsu CX20 Series, Руководство по обслуживанию

Страница: 43 / 55

1.4. SAFETY IN PERIODIC MAINTENANCE
1-23
JACKING-UP THE LIFT TRUCK FOR INSPECTION
AND REPLACEMENT OF TIRES
• Do not go under the forklift truck when it is jacked up.
• Check the following before jacking up the lift truck.
• Check that there is no one on the lift truck.
8. Check that there is no load on the forks.
• When jacking up, stop when the tires come off the ground
surface. Put blocks under both sides of the frame to prevent
the lift truck from coming down.
• Put a tire stopper behind the tires in contact with the floor so
that the lift truck will not move freely.
PRECAUTIONS WHEN USING BOOSTER (JUMPER) CABLES
• ALWAYS wear safety glasses or goggles when starting the lift truck with booster cables.
• When starting using the battery of another lift truck, do not allow the two lift trucks to touch.
• Stop the engine before connecting the cables.
• Be extremely careful not to let the cables get caught in the fan or fan belt.
• Ensure that the cables are hooked up correctly - positive-to-positive and negative-to-negative. Never let the
positive (+) and negative (-) terminals contact each other.
SAFE HANDLING OF WASTES FROM LIFT TRUCK
Obey appropriate laws and regulations when disposing of
harmful objects such as oil, filters, and batteries.
PRECAUTIONS FOR WASHING LIFT TRUCK WITH
WATER
• If water gets into the electrical system (controller, sensor,
connectors, etc.), there is the hazard that it will cause
malfunctions or operational failure. Do not wash the
electrical system with water or high-pressure steam.
• For more details on the washing method, see “LIFT TRUCK
WASHING PROCEDURE”.