3. CONNECTING EXTERNAL DEVICES
(fuel feeder, fan, circulation pumps)
Using the plugs attached to the driver, connect cables according
to the diagram below, and then insert the plugs to the
corresponding sockets in the driver housing.
You should examine wire colors in order to connect
cables to the corresponding places in connectors.
SOCKETS
PLUG IN THE DRIVER
Connection on the side of plugs attached to the driver:
1. Connect the
green
-
yellow
wire -
GROUND
to the
central pin (PE ) in the plug.
2. Connect brown and blue wire (N and L 230V) to the pins
according to marks in the picture.
L
, brown
-
PHASE
.
N
, blue
-
ZERO
,
NEUTRAL
3. Check whether the connections are correct.
Principle of wire connection on the circulation pumps.
1. Take off the lid of pump steering box
2. Connect the green-yellow wire –
GROUND
in the
steering box to the zero clamp, marked with
PE
4