5
© 2021 Kolpin Outdoors Inc.
REV 00
TALON 1000 PREPARATION:
1.
Shift vehicle transmission into “PARK”. Turn key to “OFF” position
and remove from vehicle.
2.
To gain access to electrical connections, turn the hood knobs, pull
upwards to release tabbed grommet holds and remove hood as
shown. (See illustration 1
-
1).
3.
Locate the battery box, release clips and remove cover.
Disconnect black (negative) and red (positive) cables from battery.
(See illustration 1
-
2).
4.
Remove the bumper screws from each side and front bumper as
shown. Save all for re
-
install later. (See illustrations 1
-
3 and 1
-
4).
Note, the 5mm, 6mm and 10mm bolts will be re
-
used for
bumper installation later. This winch mount kit can be used
with the stock bumper and Honda Signature
Accessory Front Bumper (see illustration 1
-
14).
Ill. 1
-
1
Ill. 1
-
3
Ill. 1
-
4
WARNING
ALWAYS
disconnect black negative (
-
) cable from
battery
FIRST
. Failure to do so will result in high
current electrical arc, and may result in battery
explosion if tool touches grounded frame. Death or
serious injury may occur.
!
!
FRONT
Hood fits on
front clips
8mm bumper bolts
6mm grille bolt
5mm grille bolt
Front OEM
bumper
Ill. 1
-
2
Clips
