12
© 2021 Kolpin Outdoors Inc.
REV 00
WINCH WIRING AND CONNECTIONS (continued):
23.
From the battery box location, find the Red Power Wire
with the angled battery terminal. The red wire is behind
the gray relays. Remove the blue protective tape from red
wire terminal. (See illustrations 1
-
25 and 1
-
26).
Note, the
starter relay can be removed by sliding the rubber
strap off the battery box plastic standoff tab
.
24.
Remove the left starter relay terminal boot and connect
the red wire to starter terminal as shown. (See illustration
1
-
27).
25.
Reinstall terminal boot and return rubber relay strap to the
battery box plastic standoff tabs.
26.
Confirm that all wiring is correct.
27.
Confirm that there are no exposed wires or
terminals.
28.
All loose wires need to be wrapped tight, and
secured away from moving parts and heat
sources.
29.
Reconnect the main vehicle power cables
and the winch power red (positive) and black
(negative) cables to battery terminals at this
time using original hardware.
30.
Reinstall the rear hood, front hood and bat-
tery box cover.
31.
With vehicle key in the ON position, check
winch for proper operation.
Ill. 1
-
25
Gray relays
Ill. 1
-
26
Ill. 1
-
27
Red
Power
Wire
Remove blue
tape
Red
Power
Wire
Starter
Relay
