AKI2G-CDB-MOD-12T-000 | SAFETY PRECAUTIONS
2
SAFETY PRECAUTIONS
Both the installer and the owner and/or operator of the operator panel must read and understand
this installation manual.
2.1
General
•
Read the safety precautions carefully.
•
Check the delivery for transportation damage. If damage is found, notify the supplier as soon as
possible.
•
Do not use the HMI panel in an environment with high explosive hazards.
•
The supplier is not responsible for modified, altered or reconstructed equipment.
•
Use only parts and accessories manufactured according to specifications of the supplier.
•
Read the installation and operating instructions carefully before installing, using or repairing
the HMI panel.
•
Never allow fluids, metal filings or wiring debris to enter any openings in the HMI panel. This may
cause fire or electrical shock.
•
Only qualified personnel may operate the HMI panel.
•
Storing the HMI panel where the temperature is lower/higher than recommended in this manual
can cause the LCD display liquid to congeal/become isotropic.
•
The LCD display liquid contains a powerful irritant. In case of skin contact, wash immediately
with plenty of water. In case of eye contact, hold the eye open, flush with plenty of water and get
medical attention.
•
The figures in this manual serve an illustrative purpose. Because of the many variables
associated with any particular installation, the supplier cannot assume responsibility for actual
use based on the figures.
•
The supplier neither guarantees that the HMI panel is suitable for your particular application, nor
assumes responsibility for your product design, installation or operation.
•
It is recommended to turn on and shut down the HMI panel at least once before installing any
components/cards or before connecting the operator panel to external devices; for example
serial devices.
•
For Marine panels only:
–
The HMI panel must be installed and operated as described in this document to meet this
certification.
–
Observe precautions for handling electrostatic discharge sensitive devices
2.2
Disposal Requirements Under WEEE Regulations
For professional users in the European Union:
If you wish to discard electrical and electronic
equipment (EEE), please contact your dealer or supplier for further information.
For disposal in countries outside of the European Union:
If you wish to discard this product
please contact your local authorities or dealer and ask for the correct method of disposal.
2.3
UL and cUL Installation
Caution:
This section is only valid for UL labeled panels.
ky
Kollmorgen | April 2017
5
