Innovative Network RTK Receiver
After the working mode is set, move to Static Setting and set up all the parameters for S680N receiver, such as
sampling interval, antenna height, mask angle, PDOP, as well as to set automatic record mode for receiver by
tapping on the switch.
After all the parameters are completed, click on
Start
button at the bottom of interface to start recording raw data
onto memory of receiver, at this moment, pay attention to the fourth indicator on receiver, check if it is flashing at
the same time.
Tips: If the switch of “Boot automatically record” is on, the receiver will record raw data file automatically after
starting up and achieving the recording condition.
