Innovative Network RTK Receiver
Base + WIFI mode
The operation on this mode is similar to Rover, go to Go to Configuration—General Config, switch the working
mode into Rover or Base, and datalink as WIFI, click on
button to confirm the settings.
Unfold the sub
-
menus under Network Config, and go to WIFI Config, switch the WIFI working mode from AP into
Client, then click on
button to make sure the WIFI working mode is successfully switched.
At this moment, click on
button to search the surrounding WIFI hotspot, once finish searching the
hotspots, choose one of the proper access point and enter the access password if required, then click on
button to confirm the settings on this page.
