K20s
- 86 -
§6.2.2.2 Radio settings
1)
Make sure all connections are alright, then power on the radio by pressing power button,
and then press “C” button to define the channel for data transmission.
2)
Please keep in mind the channel is selected to match the settings in controller later on.
3)
Radio starts to transmit when TX LED is flashing.
§7.2.2.3 Start Base Station (Please refer to 7.2.1.2)
§6.2.3 By using internet (GPRS)
1)
In this mode, base station is no longer to set up as CORS is permanently installed.
2)
Insert a SIM card into the SIM card slot in battery component.
3)
Power on the rover receiver and connect with controller via Bluetooth.
EGStar3.0 settings
1)
Go to “Config—Device Config—Instrument Config—Work mode setting—Set data link”
interface to choose “GPRS/GSM” option for rover station.
2)
Then return to main interface and go to “Config—Device Config—Network Config” page.
3)
Add a new NTRIP connection in this page or select the existed one to re-edit/use directly.
