33
English
The drum lid will not close
Make sure the juicing screw is pushed all the way in to the
strainer in order for the drum lid to close properly.
Warning: If the juicing screw is not properly in
position, the drum lid may not close.
The extracted pulp is very
moist
During the very beginning of extraction, the pulp can be more
moist. Depending on the ingredient’s condition, the extracted
pulp can be affected; especially when the ingredient is not
fresh, the juice can be extracted with the pulp.
Abnormal noise from the
juicer
1) Check if the parts are assembled correctly. Try reassembling
the parts and listen for the odd noise.
2) Do not start the juicer unless there are ingredients and/or liquid in it.
Warning: Operating the juicer without ingredients can cause
damage to the screw.
3) If the juicer is operated without ingredients or liquid, the
noise level can increase and also can lead to damage. The
friction noise from the juicing screw and the strainer will
disappear when ingredients are inserted into the juicer.
4) If the noise occurs when ingredients are inserted into the
juicer, check the size of the ingredients. Do not insert anything
over 2,5 mm thickness. Depending on the type of ingredients,
the dimensions can be smaller.
5) Noises can occur if the juicer is operated on an uneven or
slanted surface. Place the juicer on a horizontally flat surface
when operating.
Layers of separation in the
juice
Depending on the density of the ingredients, the extracted juice
may show layers of different juices. It is different from separation
due to oxidation caused by juicing with a high-speed juicer.
Juice dripping down the
body of the base
If the compression silicone on the bottom of the juicing bowl is
not plugged in correctly, the juice may seep out on to the juicer
base. Before assembling the parts, check and make sure the
compression silicone is plugged in correctly.
Discoloration of the plastic
parts
1) After juicing, if the juicer is not cleaned right away, the
remaining pulp inside the top-set can dry up which can make
disassembling and cleaning hard. This can also affect the
juicer’s performance and color.
2) Ingredients that are rich in carotenoids such as carrots and
spinach may dye plastic parts. When the parts are dyed with
carotenoids, rub vegetable oil in to the dyed areas and use mild
detergent to clean.
Warning: Vegetable oil should only be used during clean-up
for parts that are discolored. Do not use vegetable oil on the
juicing screw or the strainer. If vegetable oil or oil from animal
fat gets on the juicing screw or the strainer, this can affect
the juicer’s performance and may result in damaged parts.
3) The silicone pieces on the top-set can be detached to be
thoroughly cleaned.
Using for purposes other
than juicing
1) This juicer is designed to juice ingredients like fruits and
vegetables.
2) Do not use the juicer for extracting vegetable oil.
3) Do not juice ingredients with high contents of vegetable/ animal oil.
4) If vegetable/animal oil gets on the juicing screw or the
strainer, this canaffect the performance of the juicer and could
result in damaged parts.
