KOLEKTOR LIQUISHOT 25.3, Руководство пользователя

Страница: 12 / 28

09
5. Use of device
Charging station and rechargeable battery
The device is partially assembled already in the production process. Additional parts
must be assembled according to the instructions. It is necessary to read the safety
instructions first:
• The mains voltage must correspond to the specification of the charging station.
• Only the supplied charger may be used to charge the battery. The device must be
charged in a dry place. It is only possible to charge the battery when the temperature
of the battery is within the temperature range 0-45 °C.
• The battery is partially pre-charged. The battery must be fully charged before first
use.
• While charging the battery, the charging station and the battery may heat up. This is
normal and does not cause a malfunction. The battery can be charged at any time,
regardless of the state of discharge. Charging with a fully discharged battery does
not affect the efficiency and life of lithium-ion batteries.
• Significantly shorter operating time after charging means that the battery is worn out
and needs to be replaced. After repeated use, this is normal and expected.
• Decreased efficiency (charge status) of the battery over its lifetime is normal. The
battery can only be replaced with an original battery purchased from an authorized
dealer.
• The battery has three charge indicators. When all three indicators are green, the
battery is fully charged, and when only one indicator is flashing, the battery is nearly
empty. The display of the indicators is shown in Photo 4.
Photo 4: Display of full battery charge without waterproof protection (left) and with waterproof protection (right)