Kold-Draft GT357 Classic, Инструкция по установке и эксплуатации

Страница: 9 / 10

ICE BIN CLEANING INSTRUCTIONS
The bin should be cleaned periodically. If bin drain has any horizontal run, remove ice
around the drain fitting and flush with two liters of hot water monthly. (Long drain lines
should be flushed weekly.)
1. Clean exterior of bin frequently.
2. To clean the interior, follow instructions provided with bin.
3. Empty the storage area and disconnect the electrical power supply to the ice
maker(s).
4. Remove the ice maker top and front panels, and drain pan. Remove bin doors,
if possible, following the bin instructions.
5. When cleaning the ice maker, follow the ice maker cleaning instructions and
clean the bin last.
6. Replace all enclosure panels before re-connecting the electrical supply.
WINTER CONDITIONING
Ice cubers which are idle in the winter months require preparation as follows to prevent
damage from freezing:
1. Shut off and detach the water supply to the Ice Cuber.
2. Remove all water from the circulation system, solenoid valve, and condenser.
3. Disconnect the electrical supply.
508101502 Rev: 10-5-98
- 9 -
CAUTION:
RISK OF PERSONAL INJURY, EQUIPMENT DAMAGE OR
CONTAMINATION OF THE ICE BIN .
Do not use ammonia solutions or strong detergents in cleaning any part of the
ice maker or bin.
Never use appliance polishers or other finish preservatives or cleaners in ice
storage areas.