Kold-Draft GT357 Classic, Инструкция по установке и эксплуатации

Страница: 3 / 10

1. Remove the cabinet panels.
NOTE: When re-installing the panels, be sure that the screws engage the TOP
panel.
2. Remove the ice chute/drain pan. Drain tube assembly is packed with the drain
pan as shown below .
3. Install gasketing on top of bin if required.
4.
CAREFULLY
place the cuber onto the gasketed bin.
5. Install the drain pan/ice chute. Route the ice maker drain tube assembly
through the rear of the bin, and clamp the tubing to the drain pan nipple.
6. Electrical, water and drain locations are shown on the following drawing:
508101502 Rev: 10-5-98
- 3 -
CAUTION:
RISK OF PERSONAL INJURY OR EQUIPMENT DAMAGE .
Use a suitable lifting means and be careful of sharp edges.