9
A.
Undo the four screws attaching the
Upper Footboard (B)
to the
Crib Sides (D & E)
and
remove the upper footboard. There are two screws on each side. It is not necessary to totally
remove them from the crib sides, just loosen until footboard can be removed.
B.
Adjust the
Mattress Support (F)
to its lowest position, using the procedure shown in Step
2.
C.
Place the
Left Day Bed Cap (G)
against the
Left Crib Side (D)
(the extra two threaded
holes should face the inside of the crib as shown), align the two screws with the holes on the
cap, and tighten with the allen wrench.
D.
Repeat for the
Right Day Bed Cap (H)
.
Converting to a Day Bed:
(
G Left Day Bed Cap
(F) Mattress Support
Should
be set to lowest position
Toddler guard rail holes
should face inside
(H) Right Day Bed Cap
(B) Upper Footboard
(E) Left Crib Side
Undo both screws on
each side
