21
Disassembly of the cutting set and mincer feed
screw
Daily maintenance and checks are performed quickly and
easily using the KOLBE combination tool. As depicted in the
picture, the combination hook wrench (58, 59, 80 or 81) is
used to loosen the locking nut (6), for disassembly of the
cutting set or mincer feed screw (21) and for disassembly of
the mincer housing (20).
On Enterprise cutting systems, the combination hook
wrench (58 or 80) is used for loosening and tightening the
locking nut (6).
On the Unger cutting system, the combination hook wrench
(59 or 81) is suitable only for opening the locking nut (6).
Tightening of the locking nut is done only by hand at all
times.
6 = Locking nut
58 = Combination hook wrench
Insert the combination hook wrench (58, 59, 80 or 81)
precisely onto the cutter stub slot as shown in the picture
and carefully extract the mincer feed screw incl. cutter set
using both hands.
20 = Mincer housing
58 = Combination hook wrench
58
6
58
20
Using a ring spanner SW24 opening on the combination
hook wrench (58, 59, 80 or 81), loosen the mincer housing
(20) attachment bolts (25) for disassembly.
20 = Mincer housing
25 = Attachment bolts
58 = Combination hook wrench
25
58
20
