Kolb Atollspeed 300H, Руководство по эксплуатации, Страница: 44 / 46

Atollspeed Touch Screen Series
– Original Instructions
This document is property of Kolb Huizhou Ltd. 44
8. Troubleshooting
8.1 Safety temperature limiter
The Atollspeed oven is equipped with a safety temperature limiter.
Safety temperature limiter (STL) controls the temperature in the baking chamber and switches off
the whole baking oven when the temperature is inadmissibly high, for example in case of
thermostat failure, in order to avoid possible damages caused by overheating. The safety
temperature limiter can likewise be released by high vibration during transport or freezing. If the
oven is not working when you switch on press the STLs on the backside from the oven.
Under normal operating conditions, these STLs disengage only in the event of a technical failure.
In order to determine whether the safety temperature limiter is unlocked, push the unlocking
buttons on the STLs before putting your ATOLL baking oven into operation. If the STL
disengages several times, please contact your authorised agent for a check-up.
8.2 Oven does not start
1. Reset the main power
2. Check the fuse
3. Check the power connection
8.3 Oven does not heat up
1. Check the Safety temperature limiter
2. Check the fuse from the heating element
9. Cleaning
The oven should be cleaned every day inside and outside. Outside cleaning: Never use steel
wool or sandy cleaning material to clean the outside surface. Use a wet towel (not too moist) or
recommended stainless steel cleaner.

Switch off the oven and keep the door closed. The oven fans will cool down the oven
automatically.

Before starting to clean the oven wait at least 30 minutes to cool down .

Be careful and make sure it is not hot any more before reaching into the oven. Otherwise wait
longer.

Please take out the stone together with the fixture made of stainless steel.

For safety pull the plug before cleaning the oven.

Don’t use a water jet for cleaning, because it will damage parts of the machine and
cause leak of electricity.