Kokido Manga RC30, Руководство пользователя

Страница: 19 / 28

18
Charging The Battery
IMPORTANT NOTE: Fully charge the robot (about 5-6 hrs) before using it for the first time.
WARNING!
Use only the original external adaptor and charging cable provided.
Make sure the robot and the charger port are clean and dry before set-up.
Make sure that the robot is turned off by sliding the switch to OFF position prior to charging.
1.
Place the unit on a flat surface. Sliding the switch to the OFF position.
2.
Connect the adaptor cable to the charging cable. Align and insert the plug of chargingcable
into the charging port on the top of the unit.
3.
Connect the external adaptor to the power source. Once the robot begins charging,the
indicator light on the external adaptor will turn red. Normally, it takes about 4.5-5 hours to
reach a full charge. The indicator light will turn green when the robot is almost fully
charged.
Immediately disconnect the external adaptor from the power source if you detect any of
the following conditions:
- Offensive or unusual odor
- Excessive heat
-
Deformation, cracks, leaks
-
Smoke
4. When charging is complete, disconnect the external adaptor from the power sourceand
unplug the charging cable from the unit and external adaptor.
Normally the robot can be operated up to 90 minutes on a full charge.
Note: Clean the debris compartment regularly. Excessive debris inside the debris
compartment will increase the burden to the motor operation and shorten the operating
duration as a result.
NOTE: Rechargeable lithium-ion battery is classified as a consumable item. It has a limited
life and will gradually lose its capacity to hold a charge. Therefore, the running time of the
robot will gradually reduce after repeated charging and discharging throughout its product life.
NOTE: Let the robot rest for around 30 to 40 minutes before charging it again.