Kokido Manga RC30, Руководство пользователя

Страница: 21 / 28

20
Bumper
The bumper is optional and will be used in the following situations:
If the robot tends to follow the perimeter of the
round pool, clipping a bumper on each side of the
robot will eliminate this pattern.
If the robot tends to stay longer in some areas of
square or narrow rectangular pool, placing a
bumper at the front and end of the robot will
eliminate this pattern.
Pool Preparation
-
If there are stones, roots or metal corrosion in contact with the underside of the liner,
discard them prior to using the robot. If necessary, seek assistance from a qualified
professional.
-
If the liner is brittle, damaged or wrinkled, contact a qualified professional to perform
the necessary repairs or perform a liner replacement prior to using the robot. - It maybe
advisable to turn off the filtration system as water circulation in pool may affect the robot
movement pattern.
-
Move pool ladder, surface skimmer and other floating objects from the pool as it may
obstruct the movement of the robot’s float and, consequently, also the movement of the robot.
-
If you are using saltwater pool, make sure all salt are dissolved before placing the robot
into the water.
OPERATION
WARNING! Make sure to switch off the robot at first.
1.
Bring your robot to the side of your pool. NOTE: Do not place the robot in the pool corner
and against the pool wall as starting location. Attach the hook of the float to the handle of
swivel head. Pry to detach the float cover and release the rope from the float to the length
equivalent to the depth of pool water plus about 0.5 meters (1.6 feet). Put the rope inside
the notch and roll the rope around the post until the cover almost reaches the post. Put
the rope inside the notch and close the cover as shown.