-2-
4. Removal of the gear and spindle
(1) Loosen the four Seal Lock Screws (W/Sp. Washer) M4 x 14
[7]<7>
and remove the Packing Gland
[6]<6>
from the Gear Cover
[2]<2>
.
(2) Remove the Retaining Ring for D12 Shaft
[4]<4>
that secures the gear to the Spindle
[12]<12>
.
(3) When it is necessary to remove the gear from the Spindle
[12]<12>
, it is highly recommended that the
special repair tool J-245-3 sleeve (Code No. 307720) described below is utilized. Place the assembly on
a sleeve that matches the dimension of the Packing Gland
[6]<6>
and press down on the top of the
Spindle
[12]<12>
with a hand press to remove the gear as shown in Fig. 1.
5. Removal of the off lock lever and on lock lever
(1) After removing the Switch Lever
[55]<55>
from the Housing
[36]<36>
, remove the Off Lock Lever
[54]<54>
from the bottom of the Switch Lever
[55]<55>
. The Pin
[52]<52>
and Spring
[53]<53>
are
removed together with the Off Lock Lever
[54]<54>
.
(2) Push the Pin
[49]<49>
to remove the On Lock Lever
[51]<51>
.
Fig. 1
J-245-3 sleeve
Press
[12]<12>
[6]<6>
Gear
