Kohler VOLT VK4X1E, Руководство пользователя

Страница: 16 / 32

5.2.2 Recoil start: Make sure the unit to the unit is in the “on”
position. Pull the re-cooil handle slightly until you feel
resistance and then pull handle immediately. If failed, repeat
until the unit has started. Gentle let the cord back down to
avoid damaging the pull cord. Do not let the cord have
friction or the cord may wear easily.
5.2.3 Remote control start
Make sure the key is in the “on” location. Then press the
button on the remote control that reads “on”. If failed, retry
after 30 seconds.
6 .Operation
6.1 Ambient temp: welding 14 F- 104 F
6.2 Transport and storage: -4 F- 131F
6.3 Relative humidity: when 104 F < 50%; when 68 F, < 90%.
Max altitude equals < 3280.84 feet.
6.4 Angle of inclination: the unit must be angled less than 10
degrees of the welding supply power.
6.5 If the unit has been overloaded after connecting the
plug, the CB will close itself on the control panel. If this is
13