C. Install Overflow Elbow
·
·
·
·
·
·
·
·
·
·
·
Remove the O-rings and lubricant from the package.
Apply lubricant to the O-rings.
Assemble the O-rings into the grooves of the
overflow elbow.
Apply more lubricant to the O-rings and overflow
elbow.
Insert the overflow elbow into the overflow tube.
Attach the black gasket to the overflow elbow, as
shown.
Apply a ring of plumbers putty or other sealant,
according to the manufacturer
instructions, to the
front side of the gasket (putty will be between the
gasket and the bath).
Align the overflow elbow with the overflow hole in
the bath. From inside the bath, tighten the retainer
nut to the overflow elbow.
Tighten all coupling nuts on the tee to secure the
assembly.
Apply thread sealant tape to the tailpiece threads.
Thread the tailpiece onto the tee and tighten
securely.
Make sure the tailpiece on the drain fits properly into
the trap. The tailpiece may need to be cut for proper
fit. 1"(25mm) to 2"(50mm) of the tailpiece should fit
inside the trap.
O
O
O
O
1
(25
)
2
(50
)
C.
·
·
·
·
·
·
·
·
·
·
·
,
s
5
1023725-T01-A
