C. Bath And Whirlpool Leg
ABOVE THE FLOOR INSTALLATION OF THE
BATH/WHIRLPOOL USING THE OPTIONAL K-1172T
BATH LEGS.
It is possible to install some models above the floor with
the use of the optional K-1172T legs. The legs can be
adjusted to increase the height of the tub a minimum of
2-3/4 and a maximum of 3-1/2 .
By rotating the
drain tee 90 degrees the drain tube can be run into the
wall before meeting the trap.
Install the legs according Fig.#3. The leg mount
attached to the bath sits atop the leg secured by the nut
and bolt. Height is varied by adjusting the bottom bolt
as shown.
"
"
K-1172T
/
K-1172T
2-3/4
(
70mm)
3-1/2
(
89mm)
2
90
2
3
Fig.#2 shows one such installation.
NOTE: The front legs are shown in Fig.#2 behind
the drain for demonstration purposes. They are
actually almost directly in line with the drain.
C.
2-3/4"
(70mm)
MIN.
3-1/2"
(89mm)
MAX.
3/4" Adjustment
10
Fig. #2
2
Fig. #3
3
1023725-T01-A
