*Recommended User
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One circuit required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
Install this product according to the installation
instructions.
120 V, 15 A, 50/60 Hz
Amplifier:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Technical Information
All product dimensions are nominal.
Drop-in, Under-mount
Installation:
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
Center
Drain location:
39-3/8" x 39-3/8" (1000 mm x 1000 mm)
Basin area, bottom:
Kit is required for under-mount installations (sold
separately).
44-5/8" x 44-5/8" (1133 mm x 1133 mm)
Basin area, top:
115 lbs (52.2 kg)
Weight:
Control amplifier fits 16" (406 mm) center studs.
25' (7.6 m) cables are included.
99 lbs/ft² (483.4 kg/m²)
Minimum floor load:
27-1/2" (699 mm)
Water depth:
171 gal (647.3 L)
Water capacity:
Drop-in, 47" x 47" (1194 mm x 1194 mm)
Cutout:
Amplifier: 120 V, 1.1 A, 50/60 Hz
Electrical component
rating:
2 at 15 W per channel
2 at 30 W per channel
Amplifier channels:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to
.
12-3-2017 02:33
Underscore
®
Cube
Drop-In VibrAcoustic
®
Bath
K-1969-VB
