background image

114407-2-

CA

 (9631)

Copyright 

1996 Kohler Co.

TERRAGON

 ENAMELED CAST IRON

SELF-RIMMING AND

UNDERCOUNTER LAVATORY

BEFORE YOU BEGIN

NOTES

Use these instructions to install both self-rimming
and undercounter lavatories. Follow only the
instructions that apply to your installation.

Due to the nature of undercounter installations,
lavatories installed undercounter should be installed
by trained and experienced installers.

Prior to installation, unpack the new lavatory and
carefully inspect for damage. Return the lavatory to
its protective carton until you are ready to install it.

Do not use adhesives or adhesive sealants with any
undercounter installation.

TOOLS AND MATERIALS REQUIRED

Safety glasses

Safety shoes

Pencil

Scissors

Tape measure

Putty knife

Screwdriver

Hole saw

Keyhole saw or saber saw

Drill (1/2” dia. drill bit or larger)

Sealant

ROUGHING-IN DIMENSIONS

Fig. #1

116

3/8” COLD

1-1/4” OUTLET

3/8” HOT

(S)

(T)

15-3/4”

7-7/8”

9-3/4”

4”

19-3/4”

5/8”

7-5/8”

L OF FITTING**

C

4”

31”

*10-1/2”

ADA DRAIN
OUTLET

1-1/2”

 9”
MIN.

 27”
MIN.

 8”
MIN.

 6”

MAX.

ADA CLEARANCE
SELF-RIMMING

4”

 34”

24”

 9”
MIN.

 27”
MIN.

 8”
MIN.

 6”

MAX.

ADA CLEARANCE
UNDERCOUNTER

6-3/4”

 34”

24”

*10-1/2”

*11”

*11”

Содержание TERRAGON K-2933









Отзывы: