1145740-T01-B
Manual Flushing
Sensorless Cleaning Mode
Press the manual button for about 2 seconds and the urinal
will automatically flush once.
Enter or exit the sensorless cleaning mode by pressing the
manual button for over 5 seconds.
Under this mode, press the manual button for about 2
seconds to control the urinal to flush or stop flushing. The
longest continuous flushing time is about 15 seconds.
This function will automatically exit after it is started for about
8 minutes.
This function can be used after the power is
turned on for ten minutes.
2
5
2
15
8
Notice:
Manual Button
Fig.16
16
-7-
MAINTENANCE
Fig.17
17
Clean the Filter Screen
If the flushing volume reclines sharply after installation or
used for a long time with no cause from water pressure, the
filter may need a wash. Please operate as following steps:
Remove the
a. Turn off the water supply and power
supply before cleaning the filter.
b. Avoid damaging or losing the filter during
cleaning.
Caution:
Fixture, Valve, Battery Box Assembly and take
out the filter, clean the filter and then reinstall it.
Filter
Valve Cap Kit
Fixture, Valve,
Battery Box Assy.
a.
b.
